Back to 2000 BMW 528i
Help
2000 BMW 528I
2.8L I6 M52•RWD•AUTOMATIC•gas•M52B28
1 active safety recall on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor496Torque3165Fluid8DTC1244Battery1Maintenance0Recalls1
P1351high severityPowertrain

Misfire Cylinder 7 With Fuel Cut-Off

on 2000 BMW 528i 2.8L I6 M52 · RWD

What this code means

The DME detected a severe misfire on Cylinder 7 and has shut off its fuel injector to protect the catalytic converter. This code appears on BMW V8 and V12 engines only.

Symptoms

  • Check Engine Light flashing
  • Rough running
  • Significant power loss
  • Engine vibration

Common causes

  • Faulty ignition coil Cylinder 7
  • Worn spark plug Cylinder 7
  • Injector failure
  • Low compression Cylinder 7
  • Timing chain stretch affecting Bank 2

Diagnostic steps

  1. Read misfire counters
  2. Swap coil from Cylinder 7
  3. Inspect spark plug
  4. Test injector flow
  5. Compression test Cylinder 7

Repair notes

Replace faulty ignition coil or spark plug on Cylinder 7.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2000 BMW 528i repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW 528i — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →