C0111moderate severityChassis
Brake Apply Circuit Low
on 1999 BMW 528iT E39 2.8L I6 M52 Touring · RWD
What this code means
Low signal in the brake apply circuit indicates the module does not see brake application.
Symptoms
- Cruise control inoperative
- Shift interlock stuck
- Brake lights may not illuminate
- ABS light on
Common causes
- Brake switch stuck open
- Wiring short to ground
- Brake pedal not contacting switch
- Switch plunger broken
Diagnostic steps
- Check if brake lights illuminate when pedal pressed
- Test switch continuity
- Inspect switch mounting and pedal contact
- Check wiring for shorts to ground
Repair notes
Adjust or replace brake light switch. Check pedal bumper pad.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic