U0118high severityNetwork
Lost Communication with Alternator/Generator Module
on 2020 BMW i3 42 kWh Single Motor RWD · RWD
What this code means
Cannot communicate with the smart alternator or integrated starter-generator module.
Symptoms
- Battery warning light
- Charging system malfunction
- Battery not charging
- Voltage fluctuations
- Stop-start system disabled
Common causes
- Smart alternator failure
- CAN bus wiring to alternator
- LIN bus issue
- Alternator connector corrosion
- Voltage regulator failure
Diagnostic steps
- Check alternator fuse
- Test alternator output voltage
- Check CAN/LIN wiring to alternator
- Inspect alternator connector
- Test alternator with direct command
Repair notes
Modern smart alternators communicate on CAN or LIN bus. Check wiring and connector at alternator.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High