U0427low severityNetwork
Invalid Data Received From Fuel Fired Heater Control Module
on 2020 BMW i3 Range Extender · RWD
What this code means
The vehicle's network is receiving corrupt or implausible data from the fuel fired (auxiliary) heater control module. This usually points to a communication fault or a problem inside the heater module itself.
Symptoms
- Auxiliary heater not working
- Warning light on dash
- Poor cabin or engine heating in cold weather
Common causes
- Faulty fuel fired heater control module
- Wiring or connector corrosion at module
- CAN bus communication fault
- Low battery voltage or bad ground
Diagnostic steps
- Scan all modules for related U-codes
- Check heater module wiring and connectors
- Verify power and ground at module
- Test CAN bus signals for the module
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High