Free API
Range ExtenderRWDAUTOMATIChybrid
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
CC-ID-171high severityPowertrain

Transmission Failsafe Active

on 2021 BMW i3 Range Extender · RWD

What this code means

The transmission has entered failsafe (limp) mode to protect itself. This message is raised by the transmission control module.

Symptoms

  • Limited gear availability
  • Fixed or limited gear operation
  • Warning message on dashboard

Common causes

  • Detected transmission fault
  • Overheating transmission fluid
  • Faulty solenoid or sensor
  • Electrical/communication fault

Diagnostic steps

  1. Scan TCM for fault codes
  2. Check transmission fluid level and temperature
  3. Test solenoids and sensors
  4. Inspect wiring and communication

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2021 BMW i3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW i3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →