CC-ID-262moderate severityBody
Sunroof Anti-Trap Failure
on 2021 BMW i3 Range Extender · RWD
What this code means
The sunroof anti-trap pinch-protection system has a fault and is not functioning. Raised by the sunroof control module.
Symptoms
- Sunroof anti-trap failure warning
- Auto-close inoperative
- Erratic sunroof movement
Common causes
- Failed sunroof position sensor
- Sunroof drive motor fault
- Wiring or connector issue
- Control module failure
Diagnostic steps
- Scan module for fault codes
- Test sunroof motor and sensor
- Inspect wiring and connectors
- Re-initialize and retest
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0009
Rear Center Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment