Free API
Range ExtenderRWDAUTOMATIChybrid
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
CC-ID-363high severityPowertrain

Transmission Overload

on 2021 BMW i3 Range Extender · RWD

What this code means

The transmission has detected an overload or overheating condition. The message is raised by the transmission control module to protect the gearbox.

Symptoms

  • Reduced transmission performance
  • Transmission warning in cluster
  • Possible limp mode engagement

Common causes

  • Excessive load or towing
  • Transmission fluid overheating
  • Low or degraded transmission fluid
  • Transmission control module fault

Diagnostic steps

  1. Allow transmission to cool
  2. Check transmission fluid level and condition
  3. Scan transmission module for overload faults
  4. Inspect for mechanical drag or overload

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2021 BMW i3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW i3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →