CC-ID-364low severityChassis
RPA (Tire Pressure) Initialisation Required
on 2021 BMW i3 Range Extender · RWD
What this code means
The Runflat/Tire Pressure Alert monitor requires initialisation or reset. The message is raised by the tire pressure monitoring system.
Symptoms
- Tire pressure monitor not calibrated
- RPA warning in cluster
- No pressure warnings until reset
Common causes
- Tire pressures recently adjusted
- Wheel or tire change performed
- System not reset after service
- TPMS sensor fault
Diagnostic steps
- Set all tires to correct pressure
- Perform RPA/TPMS reset procedure
- Drive vehicle to complete initialisation
- Scan TPMS for sensor faults
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic