P3015moderate severityPowertrain
Intake Valve Control Solenoid Circuit Intermittent Bank 1
on 2010 BMW M3 E90 4.0L V8 S65 · RWD
What this code means
The intake valve control solenoid on Bank 1 has an intermittent electrical fault. Continuous VVT systems use this solenoid to control cam phasing oil flow.
Symptoms
- Check Engine Light comes and goes
- Intermittent rough idle
- Sporadic power loss
- Variable valve noise
- Inconsistent fuel economy
Common causes
- Loose solenoid connector
- Wiring chafing against engine
- Solenoid internal intermittent failure
- Thermal expansion causing contact loss
- Corroded pins
Diagnostic steps
- Monitor VVT solenoid command vs cam position
- Wiggle test on solenoid connector
- Inspect wiring harness routing
- Check connector pin tension
- Test solenoid at operating temperature
Repair notes
Repair connector or replace VVT solenoid. Re-route wiring away from heat sources.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1