U0428low severityNetwork
Invalid Data Received from TPMS Module
on 2010 BMW M3 E90 4.0L V8 S65 · RWD
What this code means
Data from the Tire Pressure Monitoring System is invalid or inconsistent.
Symptoms
- TPMS warning light
- Incorrect tire pressure readings
- TPMS malfunction indicator
- Pressures shown as dashes
Common causes
- TPMS sensor battery dead
- Sensor ID mismatch
- CAN bus noise
- TPMS module calibration lost
- Aftermarket wheels blocking signal
Diagnostic steps
- Check TPMS sensor signals with tool
- Relearn TPMS sensor IDs
- Check CAN bus quality
- Verify correct sensors for vehicle
- Check for wheel well interference
Repair notes
Relearn TPMS sensor IDs. Replace sensors with dead batteries.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High