4.0L V8 S65RWDDCTgas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
29CEhigh severityPowertrain

Misfire Cylinder 3

on 2011 BMW M3 E90 4.0L V8 S65 · RWD

What this code means

The engine control module detected a misfire on cylinder 3, meaning combustion is not completing properly. This is the BMW equivalent of OBD code P0303.

Symptoms

  • Rough idle
  • Engine hesitation
  • Check engine light flashing

Common causes

  • Faulty ignition coil
  • Worn spark plug
  • Fuel injector fault
  • Low compression or vacuum leak

Diagnostic steps

  1. Read freeze frame and confirm cylinder 3 misfire
  2. Swap coil and plug to another cylinder
  3. Test injector operation on cylinder 3
  4. Perform compression test on cylinder 3
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2011 BMW M3 E90 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW M3 E90 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →