🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2014 BMW M4

3.0L Twin-Turbo I6RWDDCTgasS55B30turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this M4
Every control module on the 2014-2017 BMW M4 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electric Power Steering (EPS)3.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Steering column, integrated with steering rack or column assembly
🔧 BMW ISTA/P
⚠️ Steering angle sensor calibration and adaptation mandatory. Alignment required after installation.
Integrated Heating/Air Conditioning (IHKA)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, integrated with climate control panel
🔧 BMW ISTA/D
⚠️ Automatic climate control. Requires adaptation after installation.
Electronic Transmission Control (EGS)2.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Transmission tunnel, under center console or mounted on transmission
🔧 BMW ISTA/P
⚠️ Adaptation required after installation. Manual transmission models do not have this module.
Car Access System (CAS)2.0 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Steering column area, behind instrument cluster or under dash
🔧 BMW ISTA/P
⚠️ Immobilizer hub. Requires ISN sync with DME, key programming, and VIN coding. Dealer-only operation.
Central Information Display / iDrive Controller (CIC/NBT)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind center dashboard, above climate controls
🔧 BMW ISTA/P
⚠️ CIC (2014-2015), NBT (2016-2017). Requires VO coding and FSC code entry for navigation/features.
Footwell Module / Body Domain Controller (FRM)1.8 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Driver side footwell, behind kick panel
🔧 BMW ISTA/P
⚠️ Controls most body functions. Replacement requires extensive VO coding and module programming.
Dynamic Stability Control (DSC)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, driver side near brake master cylinder
🔧 BMW ISTA/D
⚠️ Brake bleeding required after replacement. Steering angle sensor calibration mandatory.
Rear View Camera / Top View Camera (RFK/TRSVC)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk lid (rear camera) or integrated in mirrors/bumpers (top view)
🔧 BMW ISTA/D
⚠️ Camera calibration required. Top view system requires multiple camera coding.
Central Gateway Module (ZGM)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind glove box or passenger footwell area
🔧 BMW ISTA/P
⚠️ Critical security module. Replacement requires dealer-level authentication and full vehicle recoding.
Active Cruise Control Radar (ACC)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Front bumper, center behind grille
🔧 BMW ISTA/P
⚠️ Optional equipment. Requires precise aim calibration and dealer-level programming.
Door Module (FZD)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, behind door panel
🔧 BMW ISTA/D or Autel
⚠️ Controls window, mirror, and lock functions per door. Window initialization required.
Digital Motor Electronics (DME)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, driver side firewall behind strut tower
🔧 BMW ISTA/P
⚠️ Requires ISN synchronization with CAS. Dealer authentication mandatory for programming.
Park Distance Control (PDC)1.2 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Trunk area, driver side or behind rear bumper
🔧 BMW ISTA/D
⚠️ Parking sensors. Calibration required if sensors are disturbed.
Advanced Crash Safety Module (ACSM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, under shifter trim or behind center stack
🔧 BMW ISTA/D
⚠️ Battery must be disconnected 10+ minutes before removal. VIN coding required.
Adaptive Headlight Module (AHL)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Each headlight assembly, integrated into headlight housing
🔧 BMW ISTA/D
⚠️ Adaptive LED/Xenon headlights. Requires headlight aim calibration and coding per side.
Electronic Damper Control / Vertical Dynamics Management (EDC/VDM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk area, driver side near wheel well
🔧 BMW ISTA/D
⚠️ Adaptive M suspension. Requires calibration and adaptation after replacement.
Telematics Communication Box (TCB)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk area, driver side or under rear deck
🔧 BMW ISTA/D
⚠️ Handles BMW Assist and ConnectedDrive. Subscription activation may be required.
Kombi-Instrument (KOMBI)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument panel, behind steering wheel
🔧 BMW ISTA/D
⚠️ Mileage programming required. Used clusters must have mileage legally transferred.
Fuel Pump Control Module (EKPM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk floor, under trunk mat near fuel tank
🔧 BMW ISTA/D or Autel
⚠️ Simple module. Basic coding usually sufficient with aftermarket tools.
Seat Module (SM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under each front seat, driver and passenger
🔧 BMW ISTA/D or Autel
⚠️ Controls power seat functions and memory. Basic coding usually sufficient.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →