U0102high severityNetwork
Lost Communication with Transfer Case Control Module
on 2000 BMW M5 4.9L V8 S62 · RWD
What this code means
Cannot communicate with the transfer case control module that manages AWD/4WD operation.
Symptoms
- 4WD/AWD warning light on
- Transfer case stuck in mode
- Cannot switch between 2WD and 4WD
- Service 4WD message
Common causes
- Transfer case module power failure
- CAN bus wiring to module
- Transfer case module failure
- Fuse blown
- Connector corrosion
Diagnostic steps
- Check transfer case module fuse
- Test module power and ground
- Inspect CAN bus wiring to module
- Try direct communication with module
- Check connector for corrosion
Repair notes
Check fuses and power supply first. Common on trucks after water fording.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High