U0136low severityNetwork
Lost Communication with Leveling Control Module
on 2000 BMW M5 4.9L V8 S62 · RWD
What this code means
Cannot communicate with the automatic leveling or load-leveling suspension module.
Symptoms
- Headlight auto-leveling disabled
- Vehicle sitting unevenly
- Leveling warning message
Common causes
- Leveling module failure
- CAN bus wiring
- Module power loss
- Height sensor issue
Diagnostic steps
- Check leveling module fuse
- Test power and ground
- Check CAN wiring
- Test height sensors
- Inspect leveling actuators
Repair notes
Check fuses and height sensor operation. Common issue after suspension work.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High