Free API
CC-ID-195moderate severityBody

Park Distance Control Failure

on 2000 BMW X5 4.4i E53 4.4L V8 M62 · AWD

What this code means

The Park Distance Control system has failed and parking sensors are inoperative. Raised by the PDC control module.

Symptoms

  • No parking sensor warnings
  • PDC failure message displayed
  • Reduced parking assistance

Common causes

  • Faulty parking sensor
  • Sensor contamination or damage
  • Wiring or connector fault
  • PDC control module fault

Diagnostic steps

  1. Read PDC fault codes
  2. Inspect and clean sensors
  3. Test individual sensor response
  4. Check wiring and module

Other Body codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2000 BMW X5 4.4i E53 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW X5 4.4i E53 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →