Free API
CC-ID-42critical severityChassis

Brake and Driving Control Failure

on 2000 BMW X5 4.4i E53 4.4L V8 M62 · AWD

What this code means

A combined failure affecting braking and driving stability controls has been detected. Raised by the DSC/brake control system.

Symptoms

  • Brake warning light on
  • DSC failure indicator
  • Reduced braking assistance

Common causes

  • DSC hydraulic unit fault
  • Wheel speed sensor failure
  • Brake pressure sensor fault
  • Wiring or connector fault

Diagnostic steps

  1. Read DSC and brake fault codes
  2. Check wheel speed sensors
  3. Inspect brake pressure sensors
  4. Verify hydraulic unit operation

Other Chassis codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2000 BMW X5 4.4i E53 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW X5 4.4i E53 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →