P0860high severityPowertrain
Gear Shift Module Communication Circuit
on 2000 BMW X5 4.4i E53 4.4L V8 M62 · AWD
What this code means
The transmission control module has lost communication with the gear shift module or is detecting an error on the data line between them. This can prevent proper gear selection and shifting.
Symptoms
- Gear position display incorrect or blank
- Transmission stuck in gear or won't shift
- Warning light on dash
Common causes
- Faulty gear shift module
- Damaged or corroded wiring/connectors
- Communication bus fault
- Failed transmission control module
Diagnostic steps
- Scan for related communication codes
- Inspect gear shift module wiring and connectors
- Check communication line for continuity and voltage
- Test or replace gear shift module if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1