P2137high severityPowertrain
Throttle/Pedal Position Sensor/Switch E/F Voltage Correlation
on 2000 BMW X5 4.4i E53 4.4L V8 M62 · AWD
What this code means
The E and F pedal or throttle position sensor signals do not agree with each other. The PCM sees a mismatch between the two redundant channels.
Symptoms
- Check engine light on
- Reduced power / limp mode
- Erratic acceleration
Common causes
- Faulty accelerator pedal position sensor assembly
- Wiring fault in E or F circuit
- Poor connector contact
- PCM signal processing fault
Diagnostic steps
- Scan and compare E and F sensor values
- Inspect shared wiring and connectors
- Wiggle-test harness for intermittent faults
- Replace pedal sensor assembly if signals mismatch
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1