U0040high severityNetwork
Control Module Communication Bus D Low
on 2000 BMW X5 4.4i E53 4.4L V8 M62 · AWD
What this code means
The D communication bus voltage is too low, interrupting data exchange between modules. Systems on this bus may lose communication.
Symptoms
- Warning lights illuminated
- Module communication loss
- Intermittent faults
Common causes
- Bus D shorted to ground
- Corroded or loose connectors
- Failed control module
- Damaged wiring harness
Diagnostic steps
- Scan all modules for codes
- Inspect bus D wiring for shorts
- Measure bus D voltage with scope
- Isolate modules to locate fault
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High