U0218moderate severityNetwork
Lost Communication With Door Control Module E
on 2000 BMW X5 4.4i E53 4.4L V8 M62 · AWD
What this code means
The network lost communication with door control module E. Functions controlled by that door module may stop working.
Symptoms
- Door controls unresponsive
- Lock or window failure
- Dash warning message
Common causes
- Faulty door control module E
- Harness damage in door boot
- Loose connector
- Fuse failure
Diagnostic steps
- Scan network for codes
- Check module power and ground
- Inspect connectors and harness
- Test CAN communication
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High