P0803low severityPowertrain
1-4 Upshift (Skip Shift) Solenoid Control Circuit
on 2006 BMW X5 4.8is E53 4.8L V8 N62 · AWD
What this code means
A fault exists in the 1-4 upshift (skip shift) solenoid control circuit used on manual transmissions to force an economy shift. The circuit may be open, shorted, or the solenoid failed.
Symptoms
- Skip shift light illuminated
- Check engine light on
- Forced upshift not working
Common causes
- Faulty skip shift solenoid
- Open or short in control wiring
- Corroded or damaged connector
- Faulty PCM output driver
Diagnostic steps
- Retrieve stored codes and freeze frame
- Inspect solenoid wiring and connector
- Measure solenoid resistance
- Verify PCM control signal and ground
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1