🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2024 BMW X5 M50I

4.4L V8 Twin-Turbo N63AWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this X5 M50i
Every control module on the 2024-2026 BMW X5 M50i — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Integrated Heating/Air Conditioning (IHKA)3.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, above transmission tunnel
🔧 BMW ISTA + ICOM Next
⚠️ Dashboard removal required; refrigerant recovery and recharge needed
Electronic Transmission Control (TCU)2.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Transmission housing, driver side
🔧 BMW ISTA + ICOM Next
⚠️ Adaptation and VIN coding required; transmission fluid service recommended during replacement; updated 8HP transmission software
Head Unit Operating System 8 (HU-OS8)2.2 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Behind center dashboard display
🔧 BMW ISTA + ICOM Next
⚠️ iDrive 8.0 system with curved display; FSC codes for navigation/features may need reactivation; increased integration complexity
Electric Power Steering (EPS)2.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Steering column, below dashboard
🔧 BMW ISTA + ICOM Next
⚠️ Steering angle sensor calibration required after coding
Transfer Case Control (VTG)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Transfer case housing, center undercarriage
🔧 BMW ISTA + ICOM Next
⚠️ xDrive system; fluid service recommended during replacement
Front Electronic Module (FEM)1.8 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Behind glove box, passenger footwell
🔧 BMW ISTA + ICOM Next
⚠️ Central body control; replacement requires full vehicle order coding and key synchronization
Car Access System (CAS)1.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Behind glove box, passenger footwell
🔧 BMW ISTA + ICOM Next
⚠️ All keys must be reprogrammed; ISN synchronization with DME mandatory; Digital Key Plus support
Digital Display Key Module (DDK)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Integrated with CAS module
🔧 BMW ISTA + ICOM Next
⚠️ Digital Key Plus with UWB; requires smartphone pairing and CAS synchronization; typically replaced with CAS
Adaptive LED Headlight Module (AHL)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Each headlight assembly
🔧 BMW ISTA + ICOM Next
⚠️ Headlight aim calibration required after replacement; left and right modules separate; LCI2 includes updated LED matrix and laser light option
Dynamic Stability Control (DSC)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine bay, driver side near brake master cylinder
🔧 BMW ISTA + ICOM Next
⚠️ Brake bleeding required after replacement; wheel speed sensor calibration
Central Gateway Module (ZGW)1.5 hr R&Rsecurity gateway +2.0 hr▸ programming details
📍 Behind glove box, passenger footwell
🔧 BMW ISTA + ICOM Next
⚠️ Security gateway; replacement requires dealer-level authentication and full vehicle recoding; enhanced security protocols
Instrument Cluster (KOMBI)1.2 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 BMW ISTA + ICOM Next
⚠️ Mileage programming requires dealer authentication; VIN coding mandatory; LCI2 includes updated curved display integration
Door Module (TRSVC)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door panel
🔧 Autel MaxiSys or BMW ISTA
⚠️ Four separate modules; window and mirror calibration after coding
Digital Motor Electronics (DME)1.2 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Engine bay, rear firewall driver side
🔧 BMW ISTA + ICOM Next
⚠️ ISN synchronization with CAS required; dealer authentication mandatory; G05 LCI2 updates
Active Cruise Control Radar (ACC)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Front bumper, center lower grille
🔧 BMW ISTA + ICOM Next
⚠️ Radar alignment and calibration mandatory after replacement; bumper removal required; enhanced Highway Assistant functionality
Fuel Pump Control Module (EKPM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Under vehicle, near fuel tank
🔧 BMW ISTA + ICOM Next
⚠️ Fuel system depressurization required before removal
Advanced Crash Safety Module (ACSM)1.0 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Center console, under front seats
🔧 BMW ISTA + ICOM Next
⚠️ Battery disconnect required; crash data must be cleared
Tailgate Module (HKL)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside tailgate panel
🔧 Autel MaxiSys or BMW ISTA
⚠️ Power liftgate calibration required after replacement
Electronic Damper Control (EDC)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear cargo area, driver side panel
🔧 BMW ISTA + ICOM Next
⚠️ Adaptive M suspension; ride height calibration required
Park Distance Control (PDC)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind rear bumper, center
🔧 Autel MaxiSys or BMW ISTA
⚠️ Sensor calibration required after coding
Seat Module (SM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under each front seat
🔧 Autel MaxiSys or BMW ISTA
⚠️ Separate modules for driver and passenger; memory seat coding if equipped
Telematics Communication Box (TCB)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear cargo area, driver side panel
🔧 BMW ISTA + ICOM Next
⚠️ ConnectedDrive services; 5G capability standard; SIM card and subscription activation required
Rear View Camera (RFK)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Tailgate handle
🔧 Autel MaxiSys or BMW ISTA
⚠️ Parking guidelines calibration recommended
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →