P0239moderate severityPowertrain
Turbocharger/Supercharger Boost Sensor B Circuit Range/Performance
on 2016 BMW X5 3.0L Turbo I6 · AWD
What this code means
The PCM has detected that the turbo/supercharger boost sensor B signal is outside the expected range. This usually points to a sensor or wiring fault affecting boost pressure readings.
Symptoms
- Reduced engine power
- Check engine light on
- Poor acceleration
Common causes
- Faulty boost pressure sensor
- Damaged sensor wiring or connector
- Boost/vacuum leak
- Restricted sensor reference hose
Diagnostic steps
- Scan and record freeze frame data
- Inspect boost sensor wiring and connector
- Compare sensor reading to actual boost
- Replace boost sensor if out of spec
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1