P0741high severityPowertrain
Torque Converter Clutch Circuit Performance/Stuck Off
on 2009 BMW Z4 3.0L I6 ยท RWD
What this code means
The TCC is not engaging when commanded. The engine RPM is not dropping as expected when lockup is commanded.
Symptoms
- Check Engine Light
- Higher than normal highway RPM
- Poor fuel economy
- Transmission overheating
Common causes
- TCC solenoid failure
- Worn TCC friction material
- Low line pressure
- Valve body issue
- Internal converter failure
Diagnostic steps
- Command TCC with scan tool and monitor RPM drop
- Test TCC solenoid
- Check line pressure
- Check transmission fluid condition
Repair notes
TCC solenoid replacement. If internal converter damage, torque converter replacement.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1