29CEhigh severityPowertrain
Misfire Cylinder 3
on 2012 BMW Z4 3.0L I6 · RWD
What this code means
The engine control module detected a misfire on cylinder 3, meaning combustion is not completing properly. This is the BMW equivalent of OBD code P0303.
Symptoms
- Rough idle
- Engine hesitation
- Check engine light flashing
Common causes
- Faulty ignition coil
- Worn spark plug
- Fuel injector fault
- Low compression or vacuum leak
Diagnostic steps
- Read freeze frame and confirm cylinder 3 misfire
- Swap coil and plug to another cylinder
- Test injector operation on cylinder 3
- Perform compression test on cylinder 3
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1
29E3
Lambda Multiplicative Part-Load Adaptation Limit, Bank 2