P1190moderate severityPowertrain

Engine Vacuum Leak

on 2008 Buick Enclave 3.6L V6 · AWD

What this code means

The PCM detected an engine vacuum leak based on fuel trim adaptation data. The system has determined that unmetered air is entering the engine.

Symptoms

  • Check Engine Light
  • Rough idle
  • Lean running condition
  • Poor fuel economy
  • Hissing noise from engine

Common causes

  • Cracked or disconnected vacuum hose
  • Intake manifold gasket leak
  • Brake booster vacuum leak
  • PCV valve or hose leak
  • Throttle body gasket leak

Diagnostic steps

  1. Perform smoke test on intake system
  2. Inspect all vacuum hoses and connections
  3. Check intake manifold gaskets
  4. Test brake booster vacuum hose
  5. Inspect PCV system

Repair notes

Perform smoke test to locate leak. Repair or replace damaged hoses, gaskets, or fittings.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2008 Buick Enclave repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Buick Enclave — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →