Back to 2010 Buick Enclave
Help
2010 BUICK ENCLAVE
3.6L V6•AWD•AUTOMATIC•gas
6 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor547Torque2322Fluid8DTC941Battery1Maintenance0Recalls6
P1810high severityPowertrain

TFP Valve Position Switch Circuit

on 2010 Buick Enclave 3.6L V6 · AWD

What this code means

The PCM/TCM detected a fault in the Transmission Fluid Pressure (TFP) manual valve position switch circuit. This switch tells the TCM what gear range the driver has selected.

Symptoms

  • Check Engine Light
  • Transmission stuck in one gear
  • Incorrect gear selection display
  • Harsh shifting
  • No reverse

Common causes

  • Faulty TFP switch (internal to transmission)
  • Wiring issue to TFP switch
  • Transmission connector damage
  • TCM failure
  • Low transmission fluid affecting pressure switch

Diagnostic steps

  1. Check transmission fluid level and condition
  2. Read TFP switch data with scan tool
  3. Test TFP switch circuit resistance
  4. Inspect transmission connector
  5. Compare commanded gear to actual gear

Repair notes

Check fluid level first. TFP switch is internal to the transmission and requires pan removal to access. Replace switch or repair connector.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2010 Buick Enclave repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Buick Enclave — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →