P1370moderate severityPowertrain
IC Module 4X Reference Circuit Too Many Pulses
on 2018 Buick Enclave 3.6L V6 · AWD
What this code means
The PCM detected too many pulses from the 4X reference signal in the ignition control circuit. This can be caused by electrical noise or a failing component.
Symptoms
- Check Engine Light
- Engine misfires
- Timing issues
- Rough running
Common causes
- Damaged crankshaft reluctor wheel (extra material)
- Electrical noise in 4X circuit
- Faulty ignition control module
- Wiring interference
Diagnostic steps
- Scope 4X reference signal for extra pulses
- Inspect crankshaft reluctor wheel
- Check wiring for electromagnetic interference
- Test IC module
Repair notes
Inspect reluctor wheel for damage. Shield wiring from interference sources. Replace IC module if faulty.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1