🌍 International coverage, work in progress. This European-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2026 CADILLAC CT4-V

2.7L Turbo I4RWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this CT4-V
Every control module on the 2020-2026 Cadillac CT4-V — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)2.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Integrated into transmission assembly, driver side of 10-speed automatic
🔧 GDS2 via Techline Connect
⚠️ Requires transmission fluid drain; adaptive learning reset required after programming
Body Control Module (BCM)2.0 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Behind instrument panel, center stack area above center console
🔧 GDS2 via Techline Connect
⚠️ Controls lighting, door locks, windows; extensive configuration required for vehicle options
Gateway Module (GM)1.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Behind instrument panel, center area near BCM
🔧 GDS2 via Techline Connect
⚠️ Security gateway; controls access to other modules; critical for network communication
Electric Power Steering Control Module (EPSCM)1.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Steering column assembly, below instrument panel
🔧 GDS2 via Techline Connect
⚠️ Steering angle sensor calibration required after replacement
Active Chassis Control Module (ACCM)1.8 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine compartment or under vehicle, center mounted
🔧 GDS2 via Techline Connect
⚠️ Performance traction management system; V-Series specific; calibration required
Surround Vision Camera Module (SVCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind rearview mirror or center stack area
🔧 GDS2 via Techline Connect
⚠️ Processes multiple camera inputs; rear vision and surround view; calibration required
Electronic Brake Control Module (EBCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, driver side near brake master cylinder
🔧 GDS2 via Techline Connect
⚠️ Brake system bleed required after replacement; integrates ABS, traction control, and stability control
Heating, Ventilation and Air Conditioning Control Module (HVAC)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind instrument panel, center stack integrated with climate controls
🔧 GDS2 via Techline Connect
⚠️ Dual-zone automatic climate control; configuration for vehicle options required
Infotainment Control Module (ICM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Center stack, integrated with 8-inch or 10-inch touchscreen display
🔧 GDS2 via Techline Connect
⚠️ Cadillac User Experience (CUE) system; Apple CarPlay/Android Auto integration
Magnetic Ride Control Module (MRCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Rear cargo area or under rear seat, center mounted
🔧 GDS2 via Techline Connect
⚠️ Optional on CT4-V; adaptive damping system; calibration required after replacement
Parking Assist Control Module (PACM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear cargo area, behind rear trim panel
🔧 GDS2 via Techline Connect
⚠️ Ultrasonic parking sensors; front and rear detection
Instrument Panel Cluster (IPC)1.2 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Instrument panel, behind steering wheel
🔧 GDS2 via Techline Connect
⚠️ Digital cluster; VIN and mileage programming required; odometer transfer mandatory
Engine Control Module (ECM)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine compartment, driver side firewall area, mounted to bulkhead
🔧 GDS2 via Techline Connect
⚠️ VIN programming and security gateway unlock required; 2.7T and 3.6L V6 engines
Fuel Pump Control Module (FPCM)1.2 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Rear of vehicle, near fuel tank or integrated with fuel pump assembly
🔧 GDS2 or Autel MaxiSys
⚠️ Fuel tank access required; adaptive fuel pressure relearn after replacement
Sensing and Diagnostic Module (SDM)1.0 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Center console area, below center stack or under front seats
🔧 GDS2 via Techline Connect
⚠️ Battery disconnect and 2-minute wait required; VIN programming mandatory
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside door panels, all four doors
🔧 GDS2 or Autel MaxiSys
⚠️ Power windows, mirrors, locks; four modules total
Remote Control Door Lock Receiver (RCDLR)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Behind instrument panel, driver side or center stack area
🔧 GDS2 via Techline Connect
⚠️ Keyless entry/start system; key fob programming required after replacement
OnStar Communication Module (VCIM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind headliner, above rearview mirror or rear cargo area
🔧 GDS2 via Techline Connect
⚠️ OnStar subscription reactivation required; 4G LTE connectivity
Headlamp Control Module (HCM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind headlamp assemblies, driver and passenger side engine compartment
🔧 GDS2 via Techline Connect
⚠️ LED headlamps; automatic high beam and adaptive lighting features
Rear Radar Sensor Module (RRSM)0.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Rear bumper, driver and passenger side corners
🔧 GDS2 via Techline Connect
⚠️ Blind spot monitoring and rear cross traffic alert; two modules; calibration required
Seat Control Module (SCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under front seats, driver and passenger side
🔧 GDS2 or Autel MaxiSys
⚠️ Power seat memory and heating/ventilation functions; two modules (driver/passenger)
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →