P1350high severityPowertrain
Ignition Control System
on 2010 Cadillac Escalade EXT 6.2L V8 · 4WD
What this code means
The PCM detected a general malfunction in the ignition control system. This code indicates the PCM is not receiving the expected feedback from the ignition module.
Symptoms
- Check Engine Light
- Engine misfires on multiple cylinders
- Rough running
- No start
- Loss of power
Common causes
- Faulty ignition control module
- Damaged ignition coil pack
- Wiring issue between PCM and IC module
- PCM failure
- Poor ground connection
Diagnostic steps
- Test ignition module output with scope
- Inspect ignition coils
- Check wiring between PCM and IC module
- Verify power and ground to IC module
- Test each coil primary circuit
Repair notes
Replace ignition control module or coil assembly. Check power, grounds, and wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1