B0038critical severityBody
Rollover Sensor Performance
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The rollover sensor output is outside expected parameters during self-test or normal operation.
Symptoms
- Airbag warning light on
- SRS fault stored
- Rollover protection degraded
Common causes
- Sensor calibration lost
- Sensor internal failure
- Vehicle orientation altered by suspension modification
- Excessive vibration at sensor mount
Diagnostic steps
- Read SRS freeze frame data
- Check sensor output with scan tool
- Verify vehicle is on level ground during test
- Inspect sensor mounting
Repair notes
Replace rollover sensor. Recalibrate if procedure available.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit