C0079moderate severityChassis
Steering Position Sensor Circuit High
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The steering angle sensor signal voltage is higher than the maximum expected value.
Symptoms
- Stability control disabled
- ESC light on
- Incorrect steering position displayed
Common causes
- Signal wire open circuit
- Short to battery voltage
- Sensor reference voltage issue
- Sensor failure
Diagnostic steps
- Test signal voltage at sensor connector
- Check for open circuits in signal wire
- Verify reference voltage
- Monitor output through full range
- Inspect connector pins
Repair notes
Repair open circuit or replace steering angle sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent