C0096moderate severityChassis
Brake Lamp Switch Circuit 2 Malfunction
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The secondary or redundant brake lamp switch input to the ABS/stability module is faulty.
Symptoms
- ABS light on
- Stability control disabled
- Cruise control inoperative
- Brake light inconsistency detected
Common causes
- Secondary brake switch failure
- Wiring fault in redundant circuit
- ABS module input fault
- Switch adjustment incorrect
Diagnostic steps
- Test both brake switch circuits
- Compare primary and secondary switch signals
- Adjust switch if out of specification
- Inspect wiring to ABS module
- Check both switch inputs at module connector
Repair notes
Adjust or replace secondary brake lamp switch.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent