C0130moderate severityChassis
Brake Pad Wear Sensor Circuit Front
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The front brake pad wear sensor circuit indicates a fault or that pads have reached minimum thickness.
Symptoms
- Brake pad warning light
- Service brakes message on dash
- Grinding noise from front brakes
Common causes
- Front brake pads worn to minimum
- Wear sensor wire broken or chafed
- Sensor connector disconnected during service
- Sensor embedded in pad consumed by wear
Diagnostic steps
- Check front brake pad thickness visually
- Inspect wear sensor wire for damage
- Check sensor connector
- Measure pad thickness with calipers
- Compare both front pad sets
Repair notes
Replace front brake pads and wear sensors. Sensors are typically one-time use.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent