P1190moderate severityPowertrain
Engine Vacuum Leak
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The PCM detected an engine vacuum leak based on fuel trim adaptation data. The system has determined that unmetered air is entering the engine.
Symptoms
- Check Engine Light
- Rough idle
- Lean running condition
- Poor fuel economy
- Hissing noise from engine
Common causes
- Cracked or disconnected vacuum hose
- Intake manifold gasket leak
- Brake booster vacuum leak
- PCV valve or hose leak
- Throttle body gasket leak
Diagnostic steps
- Perform smoke test on intake system
- Inspect all vacuum hoses and connections
- Check intake manifold gaskets
- Test brake booster vacuum hose
- Inspect PCV system
Repair notes
Perform smoke test to locate leak. Repair or replace damaged hoses, gaskets, or fittings.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1