P1335high severityPowertrain
Crankshaft Position Sensor Circuit
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The PCM detected a malfunction in the crankshaft position sensor circuit. The CKP sensor provides engine speed and position information critical for ignition timing and fuel injection.
Symptoms
- Check Engine Light
- Engine stalling
- No start condition
- Intermittent misfires
- Rough idle
Common causes
- Faulty crankshaft position sensor
- Damaged reluctor wheel or tone ring
- Wiring damage to CKP sensor
- Excessive sensor-to-reluctor gap
- Corroded CKP connector
Diagnostic steps
- Test CKP sensor resistance
- Scope CKP sensor signal
- Inspect reluctor wheel for damage
- Check sensor air gap
- Inspect wiring and connector
Repair notes
Replace crankshaft position sensor. Inspect reluctor wheel for missing teeth or damage.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1