P1361high severityPowertrain
Ignition Control Circuit Low Voltage
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The PCM detected lower than expected voltage on the ignition control circuit when the circuit should be high.
Symptoms
- Check Engine Light
- Engine misfires
- Rough running
- Intermittent no-start
Common causes
- Open or short to ground in IC circuit
- Faulty ignition control module
- Damaged wiring
- Poor connection at IC module
Diagnostic steps
- Test IC circuit voltage
- Check for opens or shorts to ground
- Inspect wiring and connectors
- Test ignition module
Repair notes
Repair wiring or replace ignition module.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1