P1625high severityPowertrain
PCM System Reset
on 2010 Cadillac Escalade 6.2L V8 · 4WD
What this code means
The PCM has experienced an unexpected reset during operation. This can indicate a power supply issue or internal PCM fault.
Symptoms
- Check Engine Light
- Engine momentary stumble
- Loss of adaptive data
- Multiple codes may be stored
Common causes
- Intermittent power supply to PCM
- Loose PCM connector
- Internal PCM failure
- Low battery voltage
- Ignition switch issue
Diagnostic steps
- Check all PCM power and ground circuits
- Inspect PCM connectors
- Test battery and charging system
- Monitor PCM power with oscilloscope for dropouts
- Check ignition switch
Repair notes
Check PCM power and ground connections. Verify battery and charging system. Replace PCM if internal fault confirmed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1