P0017critical severityPowertrain

Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor B

on 2010 Cadillac SRX 3.0L V6 · AWD

What this code means

The crankshaft and Bank 1 exhaust camshaft position signals do not correlate properly.

Symptoms

  • Check Engine Light
  • Rough running
  • Engine noise
  • No start condition

Common causes

  • Timing chain issue
  • Exhaust VVT solenoid failure
  • Sensor failure
  • Worn timing components

Diagnostic steps

  1. Check timing chain alignment
  2. Test exhaust VVT solenoid
  3. Inspect sensors
  4. Check oil condition

Repair notes

Repair timing system or VVT components.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Cadillac SRX repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Cadillac SRX — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →