Free API
65 kWh Single Motor FWDFWDAUTOMATICev
4 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0793moderate severityPowertrain

Intermediate Shaft Speed Sensor Circuit No Signal

on 2022 Chevrolet Bolt EUV 65 kWh Single Motor FWD · FWD

What this code means

No signal is being received from the intermediate shaft speed sensor. The transmission cannot properly determine shaft speed.

Symptoms

  • No or delayed shifting
  • Transmission stuck in limp mode
  • Warning light illuminated

Common causes

  • Failed intermediate shaft speed sensor
  • Open circuit in sensor wiring
  • Corroded or disconnected connector
  • Faulty transmission control module

Diagnostic steps

  1. Scan for no-signal fault confirmation
  2. Check connector for power and ground
  3. Test wiring continuity to TCM
  4. Replace sensor if signal absent

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2022 Chevrolet Bolt EUV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Chevrolet Bolt EUV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →