Free API
65 kWh Single Motor FWDFWDAUTOMATICev
4 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0880moderate severityPowertrain

TCM Power Input Signal

on 2022 Chevrolet Bolt EUV 65 kWh Single Motor FWD · FWD

What this code means

The transmission control module is not seeing the expected power input signal. This usually points to a wiring or supply problem feeding the TCM.

Symptoms

  • Erratic or harsh shifting
  • Transmission warning light on
  • Transmission may go into limp mode

Common causes

  • Corroded or loose TCM power connector
  • Blown or weak fuse feeding TCM
  • Damaged wiring to the TCM
  • Faulty transmission control module

Diagnostic steps

  1. Check and clean TCM power connectors
  2. Test fuse and power supply to TCM
  3. Measure voltage at TCM power input pin
  4. Inspect wiring harness for damage or shorts

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2022 Chevrolet Bolt EUV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Chevrolet Bolt EUV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →