C0100moderate severityChassis

Brake Pedal Position Sensor Circuit

on 2023 Chevrolet Bolt EUV 65 kWh Single Motor FWD · FWD

What this code means

General malfunction in the brake pedal position sensor, which provides analog brake apply data to the ABS/stability module.

Symptoms

  • ABS warning light
  • Stability control disabled
  • Regenerative braking fault on hybrids
  • Brake assist may not activate

Common causes

  • Faulty brake pedal position sensor
  • Sensor wiring damage
  • Connector corrosion at sensor
  • ABS module input failure

Diagnostic steps

  1. Read brake pedal position with scan tool while pressing pedal
  2. Check for smooth, proportional signal
  3. Inspect sensor wiring and connector
  4. Test sensor supply voltage
  5. Check for related brake switch codes

Repair notes

Replace brake pedal position sensor. Verify smooth signal across full pedal travel.

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2023 Chevrolet Bolt EUV 65 kWh Single Motor FWD repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →