Free API
P0880moderate severityPowertrain

TCM Power Input Signal

on 2023 Chevrolet Bolt EUV 65 kWh Single Motor FWD · FWD

What this code means

The transmission control module is not seeing the expected power input signal. This usually points to a wiring or supply problem feeding the TCM.

Symptoms

  • Erratic or harsh shifting
  • Transmission warning light on
  • Transmission may go into limp mode

Common causes

  • Corroded or loose TCM power connector
  • Blown or weak fuse feeding TCM
  • Damaged wiring to the TCM
  • Faulty transmission control module

Diagnostic steps

  1. Check and clean TCM power connectors
  2. Test fuse and power supply to TCM
  3. Measure voltage at TCM power input pin
  4. Inspect wiring harness for damage or shorts

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2023 Chevrolet Bolt EUV 65 kWh Single Motor FWD repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →