U3003moderate severityNetwork

Control Module Calibration Not Complete

on 2023 Chevrolet Bolt EUV 65 kWh Single Motor FWD · FWD

What this code means

A module calibration or initialization procedure has not been completed after programming or replacement.

Symptoms

  • Module in default mode
  • System not performing optimally
  • Calibration warning message
  • Adaptive values not learned

Common causes

  • Programming completed but calibration skipped
  • Calibration drive cycle not completed
  • Battery disconnected during calibration
  • Calibration procedure interrupted

Diagnostic steps

  1. Perform required calibration procedure
  2. Complete calibration drive cycle
  3. Run module-specific initialization
  4. Verify calibration parameters stored
  5. Perform post-calibration verification test

Repair notes

Complete the required calibration procedure. Some calibrations require specific driving conditions.

Other Network codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2023 Chevrolet Bolt EUV 65 kWh Single Motor FWD repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →