🌍 International coverage, work in progress. This European-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

1994–2012 CHEVROLET CHEVY

1.6L I4FWDgas
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Chevy
Every control module on the 1996-2005 Chevrolet Chevy — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Body Control Module (BCM)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind center of dashboard, above center console
🔧 GM Tech 2 with TIS2000
⚠️ Controls interior lighting, door locks, remote keyless entry; VIN programming required
Theft Deterrent Module (TDM)1.8 hr R&Rdealer / factory tool +0.5 hrwith Passlock▸ programming details
📍 Behind center of dashboard near BCM or integrated in BCM
🔧 GM Tech 2 with TIS2000
⚠️ Passlock system; 10-minute relearn procedure required after replacement
Instrument Panel Cluster (IPC)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard behind instrument panel face
🔧 GM Tech 2 with TIS2000
⚠️ Odometer programming required to transfer mileage from old cluster
Electronic Brake Control Module (EBCM)1.2 hr R&Rrelearn only +0.3 hrwith ABS▸ programming details
📍 Engine compartment, driver side frame rail near master cylinder
🔧 GM Tech 2
⚠️ Integrated with hydraulic unit (BPMV); brake bleeding and automated bleed cycle required
HVAC Control Module (HVAC)1.2 hr R&Rrelearn only +0.2 hrwith automatic climate control▸ programming details
📍 Center dashboard integrated with HVAC control head
🔧 GM Tech 2
⚠️ Manual HVAC systems use non-electronic control head; actuator calibration required
Transmission Control Module (TCM)1.0 hr R&Rdealer / factory tool +0.5 hr4L60-E/4L80-E automatic transmission▸ programming details
📍 Under driver seat mounted to floor pan
🔧 GM Tech 2 with TIS2000
⚠️ VIN programming and transmission adaptive relearn required
OnStar Communication Module (VCIM)1.0 hr R&Rdealer / factory tool +0.5 hrwith OnStar (2002+)▸ programming details
📍 Behind driver side rear interior trim panel or under rear seat
🔧 GM Tech 2 with TIS2000
⚠️ Requires OnStar account activation and ESN programming
Powertrain Control Module (PCM)0.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, passenger side firewall mounted on bracket
🔧 GM Tech 2 with TIS2000
⚠️ VIN-specific programming required; flash-reprogrammable starting 1996
Sensing and Diagnostic Module (SDM)0.7 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Under center console between front seats
🔧 GM Tech 2
⚠️ Battery disconnect and 10-minute wait required; crash data retrieval possible
Radio (RAD)0.5 hr R&Rrelearn only +0.1 hr▸ programming details
📍 Center dashboard mounted in radio cavity
🔧 Radio code entry or GM Tech 2
⚠️ Theft-lock code required after battery disconnect; some models require Tech 2 unlock
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →