P1370moderate severityPowertrain
IC Module 4X Reference Circuit Too Many Pulses
on 2000 Chevrolet Impala 3.8L V6 ยท FWD
What this code means
The PCM detected too many pulses from the 4X reference signal in the ignition control circuit. This can be caused by electrical noise or a failing component.
Symptoms
- Check Engine Light
- Engine misfires
- Timing issues
- Rough running
Common causes
- Damaged crankshaft reluctor wheel (extra material)
- Electrical noise in 4X circuit
- Faulty ignition control module
- Wiring interference
Diagnostic steps
- Scope 4X reference signal for extra pulses
- Inspect crankshaft reluctor wheel
- Check wiring for electromagnetic interference
- Test IC module
Repair notes
Inspect reluctor wheel for damage. Shield wiring from interference sources. Replace IC module if faulty.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1