P1518high severityPowertrain
Throttle Actuator Control Module Serial Data Circuit
on 2000 Chevrolet Impala 3.8L V6 ยท FWD
What this code means
The PCM is not receiving serial data from the Throttle Actuator Control module. This communication failure prevents proper throttle control.
Symptoms
- Reduced Engine Power
- Check Engine Light
- Throttle not responding
- Vehicle may not accelerate
- Stalling
Common causes
- TAC module failure
- Serial data circuit wiring damage
- Corroded connector
- PCM failure
- CAN bus issue
Diagnostic steps
- Check TAC module power supply
- Test serial data communication
- Inspect wiring between TAC and PCM
- Check for CAN bus faults
- Test TAC module
Repair notes
Repair communication wiring or replace TAC module.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1