Free API
P1335high severityPowertrain

Crankshaft Position Sensor Circuit

on 1998 Chevrolet Malibu 2.4L I4 Twin Cam · FWD

What this code means

The PCM detected a malfunction in the crankshaft position sensor circuit. The CKP sensor provides engine speed and position information critical for ignition timing and fuel injection.

Symptoms

  • Check Engine Light
  • Engine stalling
  • No start condition
  • Intermittent misfires
  • Rough idle

Common causes

  • Faulty crankshaft position sensor
  • Damaged reluctor wheel or tone ring
  • Wiring damage to CKP sensor
  • Excessive sensor-to-reluctor gap
  • Corroded CKP connector

Diagnostic steps

  1. Test CKP sensor resistance
  2. Scope CKP sensor signal
  3. Inspect reluctor wheel for damage
  4. Check sensor air gap
  5. Inspect wiring and connector

Repair notes

Replace crankshaft position sensor. Inspect reluctor wheel for missing teeth or damage.

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1998 Chevrolet Malibu repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Chevrolet Malibu — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →