As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Every control module on the 2020-2026 Chevrolet Tracker — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
📍 Engine compartment, driver side inner fender well, mounted to ABS hydraulic unit
🔧 GM SPS2 / Techline Connect or Autel + AutoAuth
⚠️ Integrated with hydraulic control unit; brake system bleeding required after replacement; VIN programming mandatory
Forward Collision Alert / Adaptive Cruise Control Module (FCA/ACC)1.5 hr R&Rdealer / factory tool +1.0 hrwith adaptive cruise control or forward collision alert▸ programming details
📍 Behind front grille, center position, mounted to radiator support
🔧 GM SPS2 / Techline Connect with radar alignment tool
⚠️ Radar alignment and calibration mandatory after replacement; requires specific alignment targets and procedure; dealer-level equipment typically required
Body Control Module (BCM)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Behind instrument panel, left side of steering column, above fuse block
🔧 GM SPS2 / Techline Connect or Autel + AutoAuth
⚠️ Controls lighting, door locks, remote start, power windows; VIN and vehicle configuration programming required; all accessory relearns needed after replacement
📍 Behind instrument panel, left side of steering column, near BCM
🔧 GM SPS2 / Techline Connect
⚠️ Central security gateway; controls all module programming access; replacement requires dealer-level authentication and full vehicle network configuration
📍 Instrument panel, behind gauge cluster lens, center of dashboard
🔧 GM SPS2 / Techline Connect or Autel + AutoAuth
⚠️ VIN and mileage programming required; odometer transfer from old module mandatory for legal compliance
Headlamp Control Module (HCM)0.8 hr R&Raftermarket tool +0.3 hrwith LED or adaptive headlamps▸ programming details
📍 Behind front bumper, driver side headlamp assembly, integrated with headlamp unit
🔧 GM SPS2 or Autel
⚠️ Configuration for adaptive lighting features required; halogen models do not have this module
Rear Vision Camera Module (RVCM)0.6 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Rear liftgate, integrated with liftgate handle assembly, center position
🔧 Scan tool with camera calibration
⚠️ Camera alignment and dynamic guidelines calibration recommended; standard equipment on all models
Tire Pressure Monitor Control Module (TPMS)relearn only +0.3 hr▸ programming details
📍 Integrated with BCM; no separate physical module
🔧 TPMS relearn tool or scan tool
⚠️ Sensor ID relearn required after tire rotation or sensor replacement; function integrated into BCM
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
Size-standard part numbers — verify your connector type before buying. Rear blades are model-specific; check the package's vehicle list.
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2026 Chevrolet Tracker 1.2L I3 Turbo Flex and can vary by trim.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years.