Free API
P0872moderate severityPowertrain

Transmission Fluid Pressure Sensor/Switch C Circuit Low

on 2009 Chevrolet Traverse 3.6L V6 · AWD

What this code means

The transmission fluid pressure sensor C circuit is reporting a voltage that is too low. This often points to a short or a genuine loss of hydraulic pressure.

Symptoms

  • Slipping transmission
  • Delayed engagement
  • Warning light illuminated

Common causes

  • Low transmission fluid
  • Short to ground in wiring
  • Failed pressure sensor
  • Internal pump or seal leak

Diagnostic steps

  1. Verify transmission fluid level
  2. Check circuit for short to ground
  3. Measure sensor voltage with scan tool
  4. Perform hydraulic pressure test

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2009 Chevrolet Traverse repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Chevrolet Traverse — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →